Cranes-manipulators

Cranes-manipulators are intended for loading, unloading and assembling of building structures and different materials, small technics and instruments in civil and industrial construction. The construction of cranes gives the possibility to mount them not only on vehicles, but also on the wheel and track-type tractors, rail transport, ships and offshore platforms. Machines, presented in the section: PM Evacuators, PM «CLASSIC», PM «GOLD», PM «SILVER» etc...

Emergency machines

Emergency machines are intended for rapid delivery to the accident site of the teams of workers and technological equipment necessary for the operation. Machines are manufactured on GAZ, KAMAZ, KRAZ chassis.

Machines, presented in the section: AT-70М, EM on GAZ, KAMAZ, KRAZ chassis etc...

Material-handlers

Material-handlers are intended for loading, unloading of loose materials, metal scrap, timber-based materials, reinforced concrete wastes, as well as for other similar works in industrial, urban, rural and land-improvement construction.

Machines, presented in the section: EK-18-45, EO-4225A-06 etc...

.

Miniloaders

Miniloaders are intended for lifting, moving, unloading, loading, storage (stacking) of various loads, using fork or other working devices (attached implements) in restricted conditions.

Machines, presented in the section: CPCD30F, GM650 (GM750), GM950 (GM1605) etc...

.

.

Trailers

Trailers are intended for transportation of technics and cargos.

Machines, presented in the section: 808, 812, 816 etc...

.

Truck-lift devices

Truck-lift devices are intended for transporting people with materials and tools in the height of 15 m. while performing maintenance, construction and other works. Truck-lift device can also be used to save lives and property from the upper floors of buildings during natural disasters and fires.

Machines, presented in the section: AP-15, AP-18, AP-22-01, VS-18-01, VS-22-01, VS-26, TVG-15N etc...

Cutting equipment

Cutting equipment is intended for cutting bushes and small plants with a maximum diameter of 10 cm. Equipped with the independently operated hydraulic grapples to hold the tree firmly during the cutting cycle.

Machines, presented in the section: BD, BF, TR, TS etc...

.

Flail mowers for cutter arms

Flail mowers for cutter arms are installed on tractors for farmer works and road-side banks cleaning, for cutting of the grass, bushes and branches up to 4-7 cm.

Machines, presented in the section: DHA, DHAS, DHE, DHIS, DHP/AV, DHPS etc...

.

.

Mowers for excavators

Mowers for excavators are intended for cutting of grass, branches, bushes and small trees.

Machines, presented in the section: TE-DXL, TE/CL, TE/CP, TE/DL, TE/DP, TFL, TFL/UX, TFM, TFM-UX, TFL/R, TFM/R, TFS, TFS/UX, TFXL, TP/R etc...

.

Mowers for loaders

Mowers for loaders are intended for cutting of bushes, branches and small trees with a diameter of 25 cm.

Machines, presented in the section: SS/CL, SS/TFF, SS/TFF-UX etc...

.

Mulchers

Forestry mulchers with drum rotor of medium heavy and heavy series are intended for cutting and milling of branches, bushes and small trees with a diameter up to 40 cm.

Machines, presented in the section: TPF, TPF-UX, TLPF, TLPF-UX etc...

.

Shredders

Shredders are intended for cutting of the grass, bushes and branches. Method of work - in line and offset with the rotor with knives or hammers. Ideal for cleaning of ditches, banks of water-course, road side banks, areas etc.

Machines, presented in the section: DHBA, DHF/H, DHL, DHLE, DHLF, DHLI, DHSE etc...

Techique for water industry

Techique for water industry is intended for clearing of water courses from the weed and acquatic grass or for cleaning from sediments and mud of the irrigated channels.

Machines, presented in the section: HKL, MFB 180, RF, FF, S1F etc...