Mounted excavators HI-TEC | Официальный сайт компании "Будшляхмаш"

Mounted excavators HI-TEC are intended for all kinds of excavation work on different types of soils. Rugged box-structured extension boom. Strong articulated joint and cylinder bearings are furnished with floating rings. Hardened and polished articulated joints. Adjustable operating table with a two-lever control system. In transport mode the balance point is close to the tractor. All backhoes are equipped with a bucket quick-release unit. The standard model is equipped with vertical support legs and a fixed lifting beam. Alternatively the following specials models are available: Model x10 with angle digging unit. Model x20 with folding support legs. Model xx4 with 420° swinging arc. Model H 100 and H 200 with a 25 cm. longer digging boom. Operator’s seat on the backhoe unit. Hydraulic or electronic remote control. Additional hydraulic couplings.

Main technical characteristics
Model	H 50	H 100/2	H 200	H 300	H 400	H 500
Reach from the swing point, m.	3,44	3,20	3,72	4,17	4,62	5,71
Digging depth, m.*	2,50	2,60	2,70	3,28	3,63	4,26
Loading height, m.*	1,72	1,80	2,05	2,32	2,69	3,00
Bucket rotation, °	175	172	176	176	176	176
Swinging arc, °	180	180	180	180	180	180
Stabilizer width (work mode), m.	1,12	1,62	1,62	1,83	1,83	2,34
Stabilizer width (transport mode), m.	---	1,53	1,53	1,75	1,75	2,34
Lift force, full reach (without bucket), kN	2,31	3,75	6,12	10,60	10,30	11,00
Digging force, using dipperstick cyl., kN	12,60	19,00	30,00	37,60	37,60	36,10
Digging froce, using bucket cyl., kN	6,04	10,60	13,70	20,60	20,60	29,70
Maximum swing moment, kNm	2,58	7,62	7,66	13,66	13,66	16,50
Side shift, ± mm	---	160	160	260	260	950
Hydraulic pressure, bar	170	175	175	175	175	200
Weight (without bucket), kg	360	532	600	800	870	1330

Please note: digging depth and loading height can vary depending on the height of excavator’s installation.