Backhoe loader Borex-3106
Printer-friendly version
Single-bucket rubber-tired excavator-loader Borex-3106 on one chassis is intended for earthwork mechanization on soils of 1-4 categories and performing of loading and unloading in urban, rural and transport construction. Original spacious cabin is manufactured according to European standards and has a high comfort and design. At the request of the customer is equipped with air conditioner with air cooler.
| Characteristics | Value |
|---|---|
| Engine | MMZ D-243 |
| power, kVt (л. с.) | 59,6 (81) |
| working volume, l | 4,94 |
| Transmission mechanical Speed, km./h. | 30 |
| number of gears forward/back | 8/1 |
| Brakes | dry disk-shaped |
| friction clutch | dry disk-shaped |
| front axle | braced reinforced, leading |
| steering gear | hydrovolume |
| Turning radius, m. | 5,2 |
| gear-type pump | НШ-71, НШ-32 |
| pressure in system, mPa | 16 |
| backhoe | |
| bucket capacity, m3 | 0,28 |
| kinematic digging depth, m. | 4,30 |
| digging radius at parking, m. | 5,5 |
| unloading height, m. | 3,6 |
| turning angle, deg. | 180 |
| digging effort, kg.с | 3500 |
| The working cycle, sec. | 15 |
| digging offsetting in each direction, m | 0,7 |
| loader | |
| jaw bucket capacity, m3 | 1,00 |
| unloading height, m. | 3,2 |
| shovel width, m. | 2,25 |
| digging depth, m. | 0,1 |
| bucket unloading angle, deg. | 45 |
| Mass operational, t. | 8,0 |
| Dimensions, mm. | 6400х2550х3700 |
© Компания "Будшляхмаш", 2008-2011
© Разработка сайта - berezko.net
